Thesis for uav

Design[ edit ] All electric aircraft to date have been powered by electric motors driving thrust-generating propellers or lift-generating rotors.

Thesis for uav

Comment Multi-rotor Unmanned Aerial Vehicles UAVs high maneuverability and their capability to hover, makes them an extensively used platform in many fields of applications. Due to the multiple rotors, they are extremely easy to steer, making them far more applicable for situations other than simply travelling from one point to another compared to their counterparts like planes and helicopters.

However, their limitations in flight time challenge the ambition of using multirotor UAVs in fully autonomous operations. To achieve a seamless synergy between the UAVs and the vehicle including a landing pad, requires the UAV to be able to perform autonomous Thesis for uav on the landing pad while it is in motion.

Landing on a moving platform is easier said than done. We might have seen a number of action movies where a helicopter lands on a moving vehicle but in the real world during real time situations, it is extremely difficult to access all the factors associated with such a landing and making it work safely.

Mentioned below are some possible methods to achieve the said task: Sensors on both the UAV and the moving platform: An Accelerometer often comes with a gyro sensor installed with it.

Our Campuses

Installing this sensor, or a more advanced sophisticated sensor on both the flying craft and the moving platform will allow the controller in the UAV to decide the perfect speed and direction for the UAV to land on the platform.

We have talked about image processing before, it is the use of simple cameras to understand the environment around the camera; the same way we interpret our environment when we see it with our eyes and process what we see with our brains. A camera is able to decide the distance between the drone and the moving platform and the relative velocity between the two.

Not only that, a camera can also decide the best location on the said platform to land on and adjust the drone according to the platform during landing.

Thesis for uav

To measure the pose of the landing pad relative to the UAV, a camera based measurement system for detecting fiducial markers was implemented as an image processing module. The imaging processing module has been extensively tested under various scenarios, such as winter conditions, bright summer sunlight at sea and indoor, all given reliable and accurate results.

The two guidance methods Parallel Navigation Guidance and Optimal Guidance These methods were discussed and compared using simulations. In the Optimal Guidance method it is possible to add constraints, such as restrictions in the flight area or control output. However, this guidance method has a high computational cost compared to the Parallel Guidance method and it is harder to implement.

Controller logic was developed to set the desired UAV trajectory, velocities and controller gains. The image processing module, the state estimator, the Parallel Navigation method and the controller logic were all implemented and running in real time on the UAV.

Results from physical tests indicates that the combination of the state estimator and the Parallel Navigation Guidance method ensures robust and accurate autonomous landing on a static target. Additionally, results from the tuned state estimator and simulations indicated that the system is able to carry out autonomous landing on landing pads in motion.

Landing has been conducted both on ground and a surface vehicles containing world class navigation system, and on a homemade landing pad containing a low cost navigation system. FFI will use the state estimator, guidance method and the controller logic developed in this project on their attempt to create fully autonomous drone swarms.LISA Pathfinder.

The first official journal article about the LISA Pathfinder results was now published in Physical Review Letters. Among the co-authors are two former PhD students of the iFR and Prof. Fichter. The term digital native describes a person that grows up in the digital age, rather than acquiring familiarity with digital systems as an adult, as a digital metin2sell.com terms were used as early as as part of the Declaration of the Independence of Cyberspace.

They were popularized by education consultant Marc Prensky in his article entitled Digital Natives, Digital Immigrants, in. MSc Thesis: UAV geothermal mapping in Austurengjar Jóhann Mar Ólafsson successfully defends his master's thesis. REYKJAVIK, AUGUST 16 – At the beginning of the summer, Jóhann Mar Ólafsson MSc in Sustainable Energy Engineering, successfully defended his master's thesis research where he created and evaluated a thermal map of Austurengjar using an unmanned aerial vehicle .

Thesis Report, November Navigation Control of an Unmanned Aerial Vehicle (UAV) Bachelor Thesis in Computer and Electrical Engineering Tae Hyun Kim & Denny Toazza. ABSTRACT. High-altitude platforms (HAPs) are aircraft, usually unmanned airships or airplanes positioned above 20 km, in the stratosphere, in order to compose a telecommunications network or perform remote sensing.

ii Project Editor Marvin Bassett ISBN Published by Air University Press in April Disclaimer The Air University Style and Author Guide provides guidance on writing, editing, and publishing matters related to official publi-.

Electric aircraft - Wikipedia